For the knife
Materials: carbon steel, ABS and Aluminum
Cut grafting stocks from 5mm up to 1.4cm diameter
Trimming blades: 3mm thick
Phillips screwdriver with red handle
Size 27cm x 10cm/10.5inch x 3.9inch
2 additional blades
How to use:
Step 1: Hold the grafting stock in the grafting tool and squeeze the handle to make the cut, repeat this step to cut the stem from the donor plant. Take care to ensure that the groove is cut in the stock plant.
Step 2: Slide the donor stem into the groove of the stock plant, matching the cut surfaces as closely as possible. If the stock and donor plant are not the same size, match on the side only.
Step 3: Place sterilizing material around the joint, and bind with tape, the sterilizing material will protect against bacteria and weather conditions.
Step 4: Use the pruner to cut useless branches from the plant.